Online CatalogueEnquiries | 01302 739050
[ Home ] [ Up ] [   ] [ Terms & Conds ] [ Search ] [ View Basket ] [ Checkout  ] [ Contact Us ] [ Login ]

Left tabGSG 1911 .22rf LBP AccessoriesRight tab

Online Catalogue > Rimfire LBP > GSG 1911 .22rf LBP Accessories
CWA AccessoriesCWA Accessories
Please note we try to have a good stock holding of CWA products. However we do run out from time to time.
Standard Recoil Spring
Standard Recoil Spring - view 1Standard Recoil Spring - view 2
Standard Recoil Spring Ref: INT-CW-SRS28
This spring matched with our guide rod greatly enhances the function of the slide to give imorved accuracy and relaible feeding.

5.40


Quantity:  

Stainless Steel Barrel Cap
Stainless Steel Barrel Cap - view 1Stainless Steel Barrel Cap - view 2
Stainless Steel Barrel Cap Ref: INT-CW-BC-BLK
GSG upgrade barrel cap for the 1911 lbp .22rf. Replace your factory barrel cap with this great looking stainless steel or black cap. Made of 17-4 stainless steel with a 11 degree crown.

Machined to fit the bushing in our PES but will also work with the factory bushing

24.50


Quantity:  

Shock Buff
Shock Buff - view 1Shock Buff - view 2
Shock Buff Ref: SB GSG
Shock buffer to iprove and control recoil to give fast recovery for aim on repeated shots

6.95


Quantity:  

Power Recoil Spring
Power Recoil Spring - view 1Power Recoil Spring - view 2
Power Recoil Spring Ref: INT-CW-PRS29
This new Power Recoil Spring is 15% stronger than the factory spring, giving you added lockup pressure on your slide.

Eliminates most miss fires caused by the slide not going all the way to battery give improved reliability

Performance Enhancement Systems kits include this spring as standard

May not work with some lower velocity ammo CCI minimag recommended

5.40


Quantity:  

Power Magazine Spring
Power Magazine Spring  - view 1Power Magazine Spring  - view 2
Power Magazine Spring Ref: INT-CW-PMS
These springs are designed to work with any of the new +4 followers giving those extra 4 rounds the added spring pressure they need to feed properly.

Great fro 3 gun competitions when those few extra round s count

Itcan be trimmed to replace factory spring in the 10 rd magazines

7.20


Quantity:  

Performance Enhancement System
Performance Enhancement System - view 1Performance Enhancement System - view 2
Performance Enhancement System Ref: INT-CW-PES-BLK
This system incorporates a custom stainless steel barrel bushing and a custom stainless steel spring plug designed specifically to fit the GSG barrel and slide.

Couple this with our already proven guide rod (sold seperately) and you have an Enhancement Package that is unmatched. We now include one of our POWER RECOIL SPRINGS with every PES

Designed to work without using the barrel screw.

This eliminates the problem of changing the point of impact every time you re-torque the barrel screw.

Take down of gun for cleaning is easier and faster.
Can improve accuracy up to 20%. Even more on worn slides!
We recommend using high velocity ammo such a s CCI Minimag.

Please note it may not work properly with standard velocity ammo.

Please note that installing the PES will change the "point of Impact" on your gun. Moving the barrel back to the center of the slide will make the gun shoot higher. In most cases the tallest front sight will compensate for this but it will depend on the gun and ammo used. If the tallest front sight does not correct POI we suggest installing our front and rear sight set designed just for the PES.

78.00


Quantity:  

Loader Assist Button
Loader Assist Button - view 1Loader Assist Button - view 2
Loader Assist Button Ref: INT-CW-LAB
Great tool for ease of reloading. Tired of using your thumb nail to load your magazines?

This tool makes loading and unloading your mags more pleasant.

Use it to disassemble the mags
Works on either side of the mag
Also serves as a multi purpose tool
Use it to punch out the pins on the gun

handy addition to your tool box.

9.50


Quantity:  

Guide Rod Combo
Guide Rod Combo - view 1Guide Rod Combo - view 2
Guide Rod Combo Ref: INT-CW-GR-COM
Made of 17-4 SS and 6061 Aluminum

Length an ddaimeter have been increased to improve strength and dependability

spring compresses more evenly and improves the functionality of the slide.

27.45


Quantity:  

Frame Hole Plug Kit
Frame Hole Plug Kit - view 1Frame Hole Plug Kit - view 2
Frame Hole Plug Kit Ref: INT-CW-FHPK
This kit includes two stainless steel screws (One extra) with black oxide finish to plug the hole left in the frame when you remove the factory barrel screw.

Kit also includes the proper size tap to tap the frame hole. This gives the gun a finished look and does not effect anything if you want to return the gun to stock condition.

6.75


Quantity:  

Base Pad Long
Base Pad Long - view 1Base Pad Long - view 2
Base Pad Long Ref: INT-CW-BP-L-B
Quick mag changes and worrying about dumping that mag.

Replace your factory plastic base pad with one of our Anodized Aluminum Base Pads.These base pads are secured with an allen head screw and are guaranteed not to come off or break

Easy on and easy off.

Add length to your magazine, making it faster and easier to insert into the gun.

The long pads are 3/4" long

Made of 6061 Aluminum

22.95


Quantity:  

Plus +3 Base Pad for GSG
Plus +3 Base Pad for GSG - view 1Plus +3 Base Pad for GSG - view 2
Plus +3 Base Pad for GSG Ref: PL3-BP-GSG
Need extra rounds in you magazine. Try these +3 Base Pads.

Base Pads are made from the same material as our other base pads but allows you to increase the magazine capacity by two rounds.

Easy on easy off

Fits both Sig & GSG mags

Add length to your magazine, making it faster and easier to insert into the gun.

A Power magazine spring is recommneded for this item

Black only
This pad also works great with an extended mag well.
Made of 6061 Aluminum

22.95


Quantity:  

+2 Base Pad
+2 Base Pad - view 1+2 Base Pad - view 2
+2 Base Pad Ref: PL2-BP-GSG
Sorry Item Discontinued Need extra rounds in you magazine. Try this +2 Base Pads.

Base Pads are made from the same material as our other base pads but allows you to increase the magazine capacity by two rounds.

Easy on easy off

Fits both Sig & GSG mags

Add length to your magazine, making it faster and easier to insert into the gun.

½" long
Black only
This pad also works great with an extended mag well.
Made of 6061 Aluminum

22.95


Quantity:  

+1 Base Pad
+1 Base Pad - view 1+1 Base Pad - view 2
+1 Base Pad Ref: INT-CW-P1BP-B
Sorry Item Discontinued make that extra round count.

This Base Pad is made from the same material as our other base pads but allows you to increase the magazine capacity by one round.

Easy on easy and off
Add length to your magazine, making it faster and easier to insert into the gun.
½" long
Black only
This pad also works great with an extended mag well.
Made of 6061 Aluminum

22.95


Quantity:  

Plus 4 Hi Cap Follower
Plus 4 Hi Cap Follower - view 1Plus 4 Hi Cap Follower - view 2
Plus 4 Hi Cap Follower Ref: INT-CW-PLUS4FOLL
We suggest using our Extra Power Magazine spring to ensure proper feeding
This follower can be used in conjunction with the + 1 Base Pad but may not feed 100% in every gun.
Works well with our other standard Aluminum Base Pads
No factory pin !! Loader Assist Button recommended

4.95


Quantity:  

Magic 9 GSG / TSC ComponentsMagic 9 GSG / TSC Components
The ultimate upgarde kits for your GSG. A must for every GSG Owner to really tighten those groups up. Developed and manufactured in the UK.

Please note the below are custom parts and shipping times may vary.
The Magic 9  Accuriser
The Magic 9  Accuriser - view 1The Magic 9  Accuriser - view 2The Magic 9  Accuriser - view 3The Magic 9  Accuriser - view 4
The Magic 9 Accuriser Ref: M9DAS
M9D Accurizer System
Turn your GSG or TSC into the competition winning "Tack Driver" it always should have been!
(Assuming your barrel crown is already good as it was on our test gun)
Easily fitted in under an hour, the M9D Accurizer System allows the barrel and slide to interact as they should in a 1911, giving very repeatable alignment of the sights with the barrel for vastly improved accuracy and grouping.
Fitting the M9D Accurizer System corrects the geometry of the slide and barrel relationship to the give a very close barrel to bushing fit while in-battery combined with free running clearance for 90% of slide travel, the result is clean cycling combined with a massive improvement in grouping.
The M9D Accurizer System is supplied as a kit with everything required to fit the system to a field-stripped pistol - the M9D Accurizer Barrel Bushing, M9D Accurizer Barrel Sleeve, bonding compound, lubricant and web link to illustrated instructions.

We recommend you fit the barrel retaining screw as leaving this out will allow breech block movement in the frame and will result in wear to both.

The photo opposite is a TSC 1911 LBP with M9D Accurizer System and Standard Length Stainless Guide Rod fitted.
The target photos shows a group shot with the M9D Accurized TSC at 50m on standard open sights, the target photo to the right shows a 24 shot group shot at 25 Yards by a customer with his Magic 9 Design Accurized GSG.

129.95


Quantity:  

Magic 9  Carbon barrel Shroud
Magic 9  Carbon barrel Shroud - view 1Magic 9  Carbon barrel Shroud - view 2
Magic 9 Carbon barrel Shroud Ref: M9DCBS
By combining high density Carbon Fibre, Aluminium Alloy and high quality Engineering Plastics we have made what we believe is the lightest (and best looking!) available TSC & GSG barrel shroud weighing in at just 60g

Picture shows a GSG with a 60g shroud fitted, along with M9D Accurizer Kit, Stainless Guide Rod, Carbon Bridge Scope Mount and Carbon Mag Release Extension

50.00


Quantity:  

Magic 9 Stainless steel guide rod
Magic 9 Stainless steel guide rod - view 1Magic 9 Stainless steel guide rod - view 2
Magic 9 Stainless steel guide rod Ref: M9DSGR
Full Length TSC and GSG M9D Stainless Guide Rod
Precision machined from solid stainless bar locally sourced in Sheffield, hand finished & polished. The standard 5.2mm M9D Full Length Stainless Guide Rod fits the standard guide rod plug perfectly, other sizes are available to order.

Enhanced Barrel Support Feature
Unlike any other GSG guide rods which are found to be under-size at the rear the M9D Guide Rod is a snug fit in the frame, eliminating barrel droop and reducing/eliminating the load on the breech block retaining screw. To provide breech block support and fit in the frame the Magic 9 Design Guide Rod incorporates a unique breech block / barrel assembly support system.
Easily installed by the owner while the gun is stripped for cleaning the Magic 9 Design Guide Rod's adjustable breech block support allows the rear section to be a good lateral fit in the frame whilst incorporating adjustments for a tight supporting fit under the barrel / breech block assembly.

Improved Slide Alignment
The Magic 9 Design Guide Rod's combination of a snug fit in the frame, tight fit under the breech and closer tolerance in the front plug improves repeatability in the alignment of the slide with the barrel and frame, thus giving a more consistent relationship between iron sights & barrel.

75.00


Quantity:  

Magic 9 enhanced guide rod system Magic 9 enhanced guide rod system Ref: M9DEGRS
Full Length, Full Size TSC and GSG M9D Stainless Guide Rod System
Incorporating all the features of the guide rod full length rod but in a full size 1911 rod, manufactured in two sections to facilitate stripping and with matching rod bush/button, buffer and Spring

150.00


Quantity:  

Magic 9 Titanium Guide Rod Magic 9 Titanium Guide Rod Ref: M9DTGR
Full Length TSC and GSG Titanium Guide Rod
Precision machined from solid Titanium bar, hand finished & polished. The 5.2mm M9D Full Length Titanium Guide Rod fits the standard guide rod bush perfectly, other available sizes to order.

95.00


Quantity:  

Stainless Guide Rod Bush/Plug Stainless Guide Rod Bush/Plug Ref: M9DGRBP
Stainless Guide Rod Bush/Plug
The M9D precision reamed Stainless Guide Rod Bush is an ideal complement the Stainless and Titanium Guide Rods

25.00


Quantity:  

Poly Buffer Poly Buffer Ref: M9DPB
The Polyurethane Buffer softens the final deceleration of the slide's rearward motion and avoids metal to metal contact of slide & frame, there is no perceptible difference in recoil but elimination of metal to metal contact combined with reduced impact on the slide and frame reduces wear to the major components of your gun and extends it's working life at the same time as slightly reducing slide travel and cycle time.

8.00


Quantity:  

Tool Steel Firing Pin Tool Steel Firing Pin Ref: M9DTSFP
Tool Steel Firing Pin
This replacement firing pin is fully machined from high quality locally sourced D2 Tool Steel with heat treated after minimising internal stresses for maximum service life, it is a direct replacement for the stamped factory pin.

35.00


Quantity:  

Online Catalogue > Rimfire LBP > GSG 1911 .22rf LBP Accessories

We accept the following payment methods:

creditcards